Wood Treatment Plant

Specification:

Model: DN1500/DN1200
Size: 6000/4000 mm
Design pressure: 1.58 Mpa
Working pressure: 1.0-1.4 Mpa
Vacuum degree(relative): -0.098 MPa
Volume: 10.59/4.5 M3
Treat volume: 7.0/3.0 M3
Power source: 380v 3 phase 50hz
Material: Q345R
Open door ways: Manual open door ways
Seam method: Silica gel seam
Safety ways: Double safety device for door and three safety device for cylinder
Alarm ways: Automatic light alarm ,over pressure and finish work

Compare

Equipment & Features »

Material of the equipment: Q345R steel which have good comprehensive mechanical property and processing property is a kind of pressure vessel special material.
Welding method: Automatic submerged arc welding, it has advantages of high productivity, good weld quality and low labor intensity. And it also hasn’t arc radiation.
The ways to open the door: Open door manually, open the door by electricity, open the door by hydraulic. Advanced open door method ,only one young girl can open the door easily.
The sealing way: With the gas-filled silica gel seal ring, the air filled style sealing effect of the equipment is significantly better than others’. And the life of the equipment is more than one year.
Safety interlocking methods of the door of the tank: Automatic pressure safety interlocking method and Manual safety interlocking method, it solved the safety problem of wrong operation.
Automatic set time function and light alarm: It can save worker’s time ,you can set any time in the control box ,once it finish ,it will stop work and alarm.
Quickly discharge chemical :10 minutes to discharge chemical ,improve treated time.
Perfect control system: The system match automatic inlet and outlet air pneumatic valve, it can balance tank pressure well.
High efficiency and save energy: once the equipment finish vacuum and pressure stage ,the pump will stop ,but whole tank still keep vacuum state.
Level control: With magnetic level gauge, when the tank preservative added to the specified location, close the valve to stop preservatives enter.
Vacuum control: Setting a negative pressure meter, vacuum reaches a predetermined value, close the valve to stop the vacuum.
Pressure Control: Design two pressure gauges, Through the valve control the tank pressure, when reaches a predetermined pressure close the valve, stop boost, and maintain a certain pressure time after pressure relief. Design 2 flange open safety valve, after reaching the design pressure relief valve automatically opens, ensure the safety of the tank.