45 degree Edge Bander J-3045

Specification:

Table size (L x B): 1150 x 900 mm
Minimum work piece length: 280 mm
Work piece thickness range:
– Inclined 45° Edge 10 – 25 mm
– Full Straight Edge 10 – 50 mm
Edge banding thickness for PVC / ABS in coil form: 0.4 – 2.0 mm
Min-radius for curved edging: 20 mm
Glue pot capacity: 3 kg
Variable feed: 4 to 16 m/min.
Front table adjustment (Up & Down): 3 mm
Front table tilt angle : 0° to 45°
Maximum setting temperature: 180°
Compressed air requirement: 0.5 / 5 – 7 hp/kg/cm²
Heating element: 1.5 kw
45° Tape groove motor: 0.73 kw
Electric motor: 0.37 kw
Power supply voltage: 415V, 3Ø
Machine dimension: (L x B x H): 2150 x 1000 x 1025mm
Electric motor: 0.37 (415V, 3Ø) kw
Approx. net weight: 330 kg

Compare

Salient Features »

This is an extremely flexible machine for application of PVC/ABS or Veneer on straight or shaped or 45° panels. The Edge Banding is a semi-automatic machine for curvilinear work piece, wherein the predefined length of PVC/ABS to be glued to the laminate can be set for repetitive work piece and the digital temp.
45° Edge Banding panels are widely used for mfg. handleless drawer, door frame, worktable etc.
Pneumatic cutting device for pre-defined length, with foot switch.
lectronic digital millimeter counter to adjust the length
Glue roller apply glue on board & tape for perfect bonding
German gearbox for smooth & power drive with long life synthetics lubrication.
Easy regulation of variable speed 4 to 16 m/min
Revolving edge coil holder plate 525 mm. Ø
Automatic lowering of the glue temperature after a temporary non-use of the machine
Hard chrome steel rollers to support & guide the work piece
Working table with specially designed hylum surface for heat insulation & frictionless movement of work piece
Tilting working table from 0° to 45° with height adjustment up to 3 mm
Electronic digital temp. controller with safety circuit, which allows to start the drive motor only when the hot glue has reached the set temperature