Three Head Boring Machine MB03H
Specification:
Max. drilling diameter: Dia-35mm ( single boring) Dia 13mm ( multi boring) Max. drilling depth: 60mm Total Spindle Qty: 21 x 3 pcs Collect Dia: ⌀ 10 mm Max. Center Distance Between holes: 1800 x 672 mm Min. Center Distance Between holes: 130 x 32 mm Spindle Speed: 2840 rpm Motor Power: 4.5 kw
Three Head Boring Machine MB3HD
Specification:
Max. drilling diameter: Dia-35mm ( single boring) Dia 13mm ( multi boring) Max. drilling depth: 60mm Total Spindle Qty: 21 x 3 pcs Collect Dia: ⌀ 10 mm Max. Center Distance Between holes: 1800 x 672 mm Min. Center Distance Between holes: 130 x 32 mm Spindle Speed: 2840 rpm Motor Power: 4.5 kw
Two Head Multi Boring MB2H
Specification:
"Max. Boring Diameter: 35mm Max. Boring Depth: 60mm The Distance Between Spindles: 32mm Drill Spindle Number: 21 pcs x 2 Rotating Speed Of Drill Shaft: 2840r/Min Total Power: 2*2 Hp Mechanical Size: 2000*2500*1450mm Spindle Speed:2840 Rpm Standard : European Weight: 500 Kgs Power: 380v,50Hz"
Universal Combined LAB 300 PLUS
Specification:
Cutterhead working width: 300 / 12 mm / inches Jointer bed length : 1300 / 51 mm / inches Max. sawblade diameter with scoring blade installed : 315 / 12 mm / inches Max. sawblade projection from table at 90°/45°: 100 / 78 3.94 / 3.07 mm / inches Cutting width on parallel fence (Rip capacity): 800 / 31.5 mm / inches Max. useful spindle length: 100 / 4 mm / inches Max. tool diameter when profiling: 210 / 8.27 mm / inches Spindle moulder speed: 3500 / 7000 / 10000 rpm (3x) Three-phase motors: 3 Hp Max. squaring stroke of sliding table saw: 1600 / 5.5 mm / ft 
Veneer Dryer 6 Section 3 Decks
Specification:
Jet Ventilated Automatic Roller Track Dryer : 4600 mm in working width Length of the heating section: 12000 mm Height: 3200 mm 6 Nos. Compact Drying Chambers with 3 Decks 1000 mm cooling section having 2 nos. fans and 2 nos. motors, 1900 mm long single roller feeding arrangement for each deck. Variable drive (Frequency Drive), Gear Box Chain Tension Devices, Cast Iron Bushes, Pinions, Sprockets and 1” Pitch Drive Roller Chain. The Dryer will be complete with 9 Nos. Electric Motors and one Electrical Control Panel, Temperature Meter.
Vertical Sanding Machine MM-W2
Specification:
Sanding Motor Power: 2.2 kw Flowing Table Motor Power: 1.5 kw Sanding Roller Lifting Range: 0-100 mm Sanding Roller Rotation Speed: 200-1200 rpm Sanding Roller Diameter: 280 mm Distance Between Two Roller Center: 380 mm Dust Collecting Hole Size: 100 mm*1 pcs Working Table Size: 1670*820 mm Overall size: 1670*820*1100 mm
Wagner Spray Booth EvoMotion 20-30
Specification:
Pump ratio: 20 :1 Operating pressure: 160 bar, 2321 PSI Volumetric flow per double stroke: 30 cm³/DS, 1,83 in³/DH Volumetric flow per 60 DH: 1.8 l/min Max. stroke rate: 60 DS/min Material inlet: A–M36x2 Material outlet: A–1/4‘‘ NPS Air inlet connection: 8 mm Air inlet pressure: 2.5 – 8.0 bar, 36 – 116 PSI Sound level at 6 bar air pressure: 74 dB(A) Material temperature: 5 - 80 °C, 41 - 176 °F Ambient temperature: 5 – 60 °C, 41 – 140 °F Material pH: 3.5 – 9 pH Max. material pressure at pump inlet: 20 bar, 290 PSI Allowable inclination: ±10 ° Weight: 11,0 kg, 24.3 lb
Wide Belt Sander MSG1300R-RP
Specification:
Working Width: 40～1300 MM Working Thickness: 2～100 MM Working Length: ≥510 MM NO.1 Roller Speed: 20 M/S NO.2 Roller Speed: 17.6 M/S Feed Speed: 5～25 M/Min Size of Abrasive Belt: 2200X1320 MM No.1 Motor Power: 30 KW No.2 Motor Power: 22 KW Delivery Motor Power: 4 KW Lift the motor power: 0.55 KW Total Motor Power: 56.55 KW No.1 Unit: ∅240mm Steel roll with eccentric adjusting No.2 Unit: ∅210mm SH85 Rubber roll+Wide aluminum polishing pad Working Air Pressure: 0.6 Mpa Working voltage: 380V,50Hz Speed of Sucked Air: 8200 m3/h Vacuuming Mouth Diameter: ∮150mm*2个
