Combination Machine WTS 350 B
Combination Machine WTS 400
Specification:
Table Size: 60"x16" Max. Planing Depth: 3mm Entrance Of Thicknesser: 6-200mm Min.Length Of Planing: 150mm Auto Feeding Speed: 8.5m/Min Spindle Speed: 5270rpm Max. Sawing Thickness: 80mm Motor Power: 2.2kw/3 HP Dimension: 1600x1660x880mm Weight: 345kgs Power : 220v, Single Phase, 50 Hz
Curvilinear Edge Bander J-2000.in
Cut Off Saw MJ274
Cut Off Saw MJ276
Daylight Hydraulic Press
Technical Parameter of Hot Press Platen :
Max. Production Size: 2600 mm x 8000 mm x 150 mm Surface Finish: = /<Ra 1.6 Flatness Tolerance: 0.05 mm Parallelism Tolerance: 0.10 mm HYD. Leak Test Pressure : = /<25 kg/CM2Technical Specification :
Technical Specification Capacity of Press: 640 TON – 12 Daylight Window Frame: (1)Over All Dimension of Press 3280 X 3900 X 1350 MM (2) No. of Window 4 Nos. – 2 Pair (3) Window Platen – 32 MM (4) Window Material IS2062 GRADE B SPECIFIC PRESSURE: 20 K.G/C.M2 ON 122 X 244 C.M BOARD AREA Heating Platen: (1)Over All Dimension 1350 X 2600 X 45/44 MM (2) No. of Platen 13 NOS. (3) Platen Material IS2062 Grade B Chemical Compo.：C≤0.20，Mn ≤1.70， Si≤0.50，P≤0.035，S≤0.035 Nb≤0.07，V≤0.15，Ti≤0.20，Cr≤0.30，N≤0.012， Mo≤0.10 Mechanical property - tensile strength：490-675; yield strength：≥345, elongation：≥21 (4) Drilling Method: BTA /GUN Drilling (5) Drilling Length : 8 Feet Long Drilling (6) No. of Holes & Diameter: 14 NOS. & 22 MM (7) Circuit Formation: 2 Inlet & 2 Outlet (8) Platen Finish: Grinding Finish on Both Side (9) Platen Cleaning: ¾’’ threaded M.S Hyd. Plug Gap Between Two Platens: 80 MM Cylinder Ram Unit: (1) No. of Unit: 8 Nos. (Window Resting) (2) Piston Diameter: 200 MM (3)Piston Stroke: 960 MM (80 x12 FULL STROKE) (4)Hardchrome & Ground With Mirror Finish Seal: Multi Seal Chevron Packing Gland Guide: Wiper Seal Working Pressure: 254.77 K.G/C.M2 Loading Side: 2600 MM Heating Medium: Steam/Thermic Fluid Oil Press Closing Time: 19 Seconds (Empty Press Closing Time) Top Bolster: 2600 X 1350 X 120 MM Bottom Bolster: 1350 X 2600 X 300 MM (EXTRA HEAVY) Connection Load: (7.5 + 7.5 + 15 = 30 H.P) Hydraulic Power Pack: 800 Ltr. Tank – Rubber Paint Coated Low Pressure Pump –Vane Pump High Pressure Pump – Vane Pump ELE. Motor – ABB Make D.C VALVES – BOSCH Rexroth Make Other Component Standard Rexroth/Polyhydron Make ELE. Control Panel: Fully Automatic Control Panel With Manual Option Inlet & Outlet Main Header: 4’’ ‘C’ Class M.S Pipe S.S Flexible PIPE: 1’’ S.S- 304 Corrugated Breaded Hose Pipe
Door Assembly Press MH2325-2
Specification:
Max. Working Length: 2500 mm Max. Working Width: 1000 mm Max. Working Thickness: 80 mm Top Cylinder Quantity: 4 pcs Each Side Cylinder Specification: Φ63*200 mm Side Cylinder Quantity: 2 pcs Each Side Cylinder Specification: Φ63*200 mm Rated Air Pressure: 0.6 mpa Rated Hydraulic Pressure: 16 mpa Dimension: 3600*2200*1900 mm Weight: 2200 kgs
Double Side Spindle Shaper
Double Side Thickness Planer TP 400 DS
Specification:
Max. Working Width: 400 mm/16" Work Piece Thickness Arrange: 5-130 mm Min. planning length: 260mm Feeding Speed: 7 or 9 m/min Upper knife planning depth: 4 mm Down knife planning depth:2 mm Spindle Speed: 7750rpm rpm Main Motor Power: 7.5HP Dimension: 875x800x1200 mm N/G Weight: 400/425Kgs
Dust Collector DC-31
Dust Collector DC-42