With Machine (Free) »
- Installation & Training.
- 1 year servicing.
- Tools and Manual
Cut Off Saw MJ274
Specification:
Max. Blade Dia.: Ø405 mm
Spindle dia.: 30 mm
Max. Cutting: 300 mm(W) x 100mm(T)
Table Size: 660×700 mm
Working Table Length: 1250 mm
Speed: 2900 rpm
Power: 5.5 kw
Dust Exit: Ø120
Overall Dimension: 3100x800x1300 mm
Description
Reviews (0)
Shipping & Delivery
Related products
Veneer Dryer 6 Section 3 Decks
Specification:
Jet Ventilated Automatic Roller Track Dryer : 4600 mm in working width Length of the heating section: 12000 mm Height: 3200 mm 6 Nos. Compact Drying Chambers with 3 Decks 1000 mm cooling section having 2 nos. fans and 2 nos. motors, 1900 mm long single roller feeding arrangement for each deck. Variable drive (Frequency Drive), Gear Box Chain Tension Devices, Cast Iron Bushes, Pinions, Sprockets and 1” Pitch Drive Roller Chain. The Dryer will be complete with 9 Nos. Electric Motors and one Electrical Control Panel, Temperature Meter.
Sliding Panel Saw STS 16 GC
Specification:
Dimension of Sliding Table: 1600*370 mm Main Saw Blade Diameter: 300 mm Max. Cutting Height At 90°: 80 mm Max. Cutting Height At 45°: 55 mm Speed of Main Saw : 4000/5000rpm Main motor : 3.0 KW (4hp) Scoring saw motor : 0.75 KW (1hp) Scoring Saw Diameter: 120 mm Saw blade tilting capacity: 0-45 degree Line voltage: 220 V/ 380 V
Panel Saw Alpha PS320E
Specification:
Dimension Of Sliding Table: 3200*365 mm Cross Cut Capacity: 3200 mm Max. Cutting Width: 1150 mm Saw Blade Diameter: 300 mm Scoring Saw Blade Diameter: 120 mm Main Spindle Diameter: 30 mm Scoring Spindle Diameter: 20 mm Max. Cutting Height At 90°: 75 mm Max. Cutting Height At 45°: 50 mm Main Saw Spindle Speed: 4000/5000 rpm Scoring Saw Blade Speed: 8000 rpm Tilting Saw Blade: 0-45° Main Motor: 4 kw Scoring Motor: 0.75 kw Net Weight: 650 kgs Dimensions: 3250*3150*900 mm
Panel Saw PS 435 EU
Specification:
Dimension of Sliding Table: 3200×435 mm Gross Cut Capacity: 3200 mm Cut Between Saw Blade & Rip Fence: 1250 mm Saw Blade Diameter: 300 mm(Φ250-Φ350) Height of Cut: 80 mm Diameter of Guide Shaft Spindle: ∮50 mm Speed of Main Saw : 3000/4000/5000 rpm Main Spindle Diameter: 30 mm Tilting Saw Blade: 0-45° Main Motor:7.5 HP Scoring Saw Blade Diameter: 20mm Scoring Motor:1 HP
45 degree Edge Bander J-3045
Specification:
Table size (L x B): 1150 x 900 mm Minimum work piece length: 280 mm Work piece thickness range: - Inclined 45° Edge 10 - 25 mm - Full Straight Edge 10 - 50 mm Edge banding thickness for PVC / ABS in coil form: 0.4 - 2.0 mm Min-radius for curved edging: 20 mm Glue pot capacity: 3 kg Variable feed: 4 to 16 m/min. Front table adjustment (Up & Down): 3 mm Front table tilt angle : 0° to 45° Maximum setting temperature: 180° Compressed air requirement: 0.5 / 5 - 7 hp/kg/cm² Heating element: 1.5 kw 45° Tape groove motor: 0.73 kw Electric motor: 0.37 kw Power supply voltage: 415V, 3Ø Machine dimension: (L x B x H): 2150 x 1000 x 1025mm Electric motor: 0.37 (415V, 3Ø) kw Approx. net weight: 330 kg
Reviews
There are no reviews yet.